Transceivers

QSFP-40G-LR4 Optical transceiver supports 40G speeds over lengths of up to 10km by utilizing four 1310nm wavelengths which each transmit data at a rate of up to 10Gbps/channel. This transceiver includes a high port density due to the smaller LC connectors, ability to use over long distances, low power consumption and low cost.

C-Flink's 400G QSFP-DD SR8 PAM4 100m optical transceiver is designed for 2x200GBASE-SR4 Ethernet links reach up to 70m (OM3) or 100m (OM4) over Multi-Mode Fiber (MMF) with FEC.This high-performance module integrates 8 data lanes in each direction with 8x26.5625GB.

40GBASE-SR4 Module supports link distances up to 100m using OM3 and 150m using OM4 multimode optical fiber cables. It primarily enables high-bandwidth 40G optical links over ribbon fiber cables terminated with multi-fiber connectors, and could also be used along with ribbon to duplex fiber breakout cables for connectivity to four 10GBASE-SR optical interfaces.

QSFP28-100G-SR4 Optical Transceiver is designed for using in 100 Gigabit Ethernet multimode fiber. It is compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE-SR4. Digital diagnostics functions are available via the I2C interface.

The 10G-SFP-T copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7 cable.

This product is a transceiver module designed for 40km optical communication applications. It is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission.

This Cisco QSFP to SFP or SFP+ Adapter (QSA) Module offers 10 Gigabit Ethernet and 1 Gigabit Ethernet connectivity for Quad Small Form-Factor Pluggable (QSFP)-only platforms.

This 10G hot pluggable transceiver provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

Our 1000Base SFP RJ45 Transceiver is based on the SFP MSA. It is compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3 and 802.3ab.